S. No.

Name of Work.

Estimated Cost

Earnest Money

Cost of Tender

Last dt. Of Sale

Date of Opening

Time Allowed

1.

Maintance of Park/Plantations, Tracks and other equipment of horticultural wing.

SH : Repairing of Parks/Path at Idgah at Motia Khan

NIT No. 01/EE/ND.2/DDA/

Rs. 82,171.00

Rs.   1,643.00

Rs.      150.00

 14.5.2008              

17.5.2008

One Month

2.

M/O  Office Building under North Zone

SH: Renovation and Other repair works in the office of EE/ND.2 at Motia Khan

NIT No.21/EE/ND.2/DDA

Rs.4,70,710/-

Rs. 9414/-

Rs . 500/-

14.5.2008             

17.5.2008

Two Month

3.

M/O 50 Nos Staff Quarters at Sector- XI Rohini

SH: P/L Ceramic Glazed of Floor Tiles in Staff Quarters

(Re-invited)

NIT No. 16/EE/ND.2/DDA

Rs. 3,83,520/-

Rs. 7670/-

Rs. 500/-

14.5.2008             

17.5.2008

Two  Month

S.

No

Description of Item

Qty.

Unit

Rate

Amount

1.

Supplying and stacking at site.

a)      Red Bajri

12.30

Cum

2.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge.

85.00

Sqm.

3.

Removal/disposal of melba by mechanical transport including loading unloading and stacking with all lead and lift for a lead of 5 KM.

138

Cum.

4.

Providing and laying in position ready mixed concrete manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 KMs having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge M-25 grade reinforced cement concrete by using 410 Kg of cement per cum of concrete All work up to floor V level.

8.50

Cum.

5.

Spreading of sludge dump manure or/and good earth in required thickness ( cost of sludge, dump manure or/and good earth to be paid separately)

12.50

Cum

S.

No

Description of Item

Qty.

Unit

Rate

Amount

1

Earth work in excavation in foundation trenches or drains (not exceeding 1.5 metre in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 metre, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metre .  a) all kinds of soil.

49.00

cum

2

Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 metre including getting out the excavated soil, and then returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming watering etc. and disposing of surplus excavated soil as directed within a lead of 50 metre a) All kinds of soils Pipes cables exceeding 80 mm diameter but not exceeding 300 mm dia metre.

18.00

metre

3

Filling available excavated earth (excluding rock) in trenches , plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering, lead up to 50 metre and lift up to 1.5 metre.

17.00

cum

4

Excavation in dumped stones or malba including stacking of serviceable and unserviceable material separately and disposal of unserviceable material up to 50 metre and lift up to 1.5 metre disposed material to be neatly dressed.

9.00

cum

5

Carriage by mechanical transport including loading, unloading and stacking Lime, mooram, building rubbish for lead upto 20 km

40.00

cum

6

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All works up to plinth level.  -  1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size).

29.00

cum

7

Providing and laying damp proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).

12.00

sqm

8

Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

12.00

sqm

9

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degrees, landings, balconies, shelves, hajjis, lintels, bands, window sills, staircases and spiral staircases, up to floor V level excluding the cost of centering and shuttering , finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

0.40

cum

10

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

6.00

sqm

11

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete- Cold twisted deformed bars.

57.00

kg

12

Brickwork with F.P.S. bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement: 6 coarse sand).

30.00

cum

13

Brickwork with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in cement mortar 1:6 (1 cement: 6 coarse sand).

29.00

cum

14

Extra for brick work in square or rectangular pillars.

3.00

cum

15

Providing and fixing ISI marked flush door shutters non decorative type, core of block board construction with frame of Ist class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters  a) 35mm thick including ISI market stainless steel but hinges with necessary screws.

5.50

Sqm

16

Providing and fixing specified wood frame consisting of battens 50x25 mm fixed with rawl plug and drilling necessary holes for rawl plugs etc. including priming coat complete- Hollock wood.

1.20

cum

17

Providing and fixing 4 mm thick plywood plain lining with necessary screws, priming coat on unexposed surface etc. complete with teak ply facing of approved manufacture.

45.00

Sqm

18

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete Fixed to steel windows by welding.

113.00

kilogram

19

Providing and fixing aluminium sliding door bolts ISI marked anodized ( anodic coating not less than grade AC-10 as per IS:1868) transparent or dyed to required colour or shades with necessary and screws etc. complete- 250x16 mm.

3.00

each

20

Providing and fixing aluminium tower bolts ISI marked anodized ( anodic coating not less than grade AC-10 as per IS:1868) transparent or dyed to required colour or shades with necessary and screws etc. complete- 250x10 mm.

3.00

each

21

Providing and fixing aluminum handle ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868 ) transparent or dyed to required colour and shade with necessary screws etc. complete-125 mm.

6.00

each

22

Providing and fixing long aluminum hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868 ) transparent or dyed to required colour and shade with necessary screws etc. complete-Single tubular stopper.

3.00

each

23

Providing and fixing IS:3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete – Hardyn make (Eddy) or equivalent.

1.00

each

24

Structural steel work in single section fixed with out connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

1059.00

kilogram

25 a)

Providing and fixing ISI marked steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or 

6.00

sqm

b)

Providing and fixing ISI marked steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or 

5.00

sqm

26

Providing and fixing T-iron door frame for doors, windows and ventilators of mild steel Tee sections, joints mitered and welded with 15x3 mm lugs 10 cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement: 3 coarse sand: 6 graded stone graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or with raw. 

53.00

kilogram

27

Welding by electric plant including transportation of electric welding plant at site etc. complete.

2000.00

each

28

Providing and fixing bright finished brass window casement fasteners of minimum weight 200 gms. To side hung steel windows with necessary welding and machine screws etc. complete.

8.00

each

29

Providing and fixing bright finished brass peg stays 300 mm long of minimum weight 330 gms. To side hung steel windows with necessary welding and machine screws etc. complete.

10.00

each

30

Structural steel work welded in built up sections / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required- in gratings, frames, guard bar, ladders, railings, brackets , gates and similar works.

191.00

kilogram

31

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse sand) a) 25mm thick.

16.00

sqm

32

Kota stone slab 25 mm thick in risers of steps, skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3( 1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

1.25

sqm

33

Providing and fixing Ist quality ceramic glazed tiles conforming to IS 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY, KAZARIA, or equivalent make in all colours, shades designs and prints except begundy, bottle green, black of any size as approved by the Engineer-in-charge in skirting, risers of steps and

6.00

sqm

34

Providing and fixing ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of Ist quality conforming to IS 13755 of  NITCO, ORIENT, SOMANY, KAZARIA, or equivalent make in colours such as White, Ivory, Grey, Fume red  brown, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the

34.00

sqm

35

Providing and laying 60 mm thick C.C. dumble /interlocking tiles (any colour) and having compressive strength 250 Kg/Sqcm and above with proper slope/camber I/c filling of joints and under paving blocks/tiles with jamuna sand all complete as per the direction of Engineer-in-charge.

131.00

sqm

36

10 cm thick average mud phuska of damped brick earth on roof laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35 Kg per cum of earth and gobri leaping with mix 1:1 (1 Clay : 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1 cement : 3 find

87.00

sqm

37

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4  stone aggregate 10 mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand as per standard design in 75x75 mm deep chase.

49.00

metre

38

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) over PVC sheet 1mx1mx400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making finishing.

3.00

each

39

Providing sand stone slab for roofing and laying them in cement mortar 1:4 (1 cement: 4 coarse sand) over wooden karries or R.C.C. battens (Karries and battens to be paid for separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand) a) Red sand stone slab 40mm thick.

87.00

sqm

40

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. a) 100 mm diametre.

9.00

each

41

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS :13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion – Single socketed pipes- 110 mm diametre.

9.00

metre

42 a)

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised- Rigid PVC rain water pipes conforming to IS :13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion – Bend 87.5% - 110 mm bend.

3.00

each

b)

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for un-plasticised- Rigid PVC rain water pipes conforming to IS :13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion – Shoe (Plain) – 110mm Shoe.

3.00

each

43

12 mm cement plaster of mix 1: 6 (1 cement: 6 fine sand).

138.00

sqm

44

15 mm cement plaster on the rough side of single or half brick wall of mix 1: 6 (1 cement: 6 fine sand).

67.00

sqm

45

Distempering with dry distemper of approved brand and manufacture (Two or more coats) and of required shade ton new work, over and including priming coat of whiting to give an even shade.

142.00

sqm

46 a)

Finishing walls with water proofing cement paint "Snowcem-Plus" of M/s Snowcem India Limited., or equivalent of required shade: a) New work (Two or more coats applied @ 3.84 Kg/10square metre).

96.00

sqm

b)

Finishing walls with water proofing cement paint "Snowcem-Plus" of M/s Snowcem India Limited. Or equivalent of required shade: a) old work (one or more coats applied @ 2.20 Kg/10square metre) over priming coat of "Cempower" primer of Snowcem or equivalent applied @0.80 liters /10 square metre complete including cost of priming coat.

827.00

sqm

47

Melamine polishing on wood work (One or more coats).

55.00

sqm

48

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade a) Two or more coats on new work.

22.00

sqm

49

Renewing glass panes with putty and nails wherever necessary a) Glass panes weighing 10 kg/square metre.

12.00

sqm

50

Providing and fixing curtain rods of 1.25 mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete- 25 mm diametre.

9.00

metre

51

Distempering with dry distemper of approved brand and manufacture ( one or more coats) and of required shade on old work to give an even shade.

838.00

sqm

52

Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work- 100 mm diametre pipes.

27.00

metre

53

Painting with enamel paint of approved brand and manufacture to give an even shade a) one or more coats on old work.

258.00

sqm

54

Providing and fixing white vitreous china pedestal type water closet (European type WC pan) with seat and lid, 10 liter low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS 7231, Parryware/ Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete including cutting. 

1.00

each

55

Providing and fixing wash basin with C.I./M.S brackets, 15 mm C.P. brass pillar taps, Kingstone/Gem/Techno/Parco, 32 mm C.P. brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls and floors wherever required. A) Flat back wash basin size 550x400mm with a single 15mm C.P. brass pillar.

1.00

each

56

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washer complete.

1.00

each

57

Providing and fixing soil, waste and vent pipes – 100 mm diametre Sand cast iron S&S pipe.

2.50

metre

58

Providing and fixing collar -100 mm sand cast iron S&S.

3.00

each

59

Providing lead caulked joints to sand cast iron/ Centrifugally cast (Spun) iron pipes of diametre - 100 mm.

6.00

each

60

Providing and fixing G.I. Pipe complete with GI fittings and clamps including cutting and making good the wall etc. (internal work) Exposed on wall a) 20 mm nominal bore.

15.00

metre

61

Providing and fixing G.I. Pipe complete with GI fittings including trenching and refilling etc. (external work) a) 20 mm diametre nominal bore.

10.00

metre

62

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI:12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank (Sintex, electroplast, star, lotus or equivalent having .

500.00

per liter capacity

63

Providing, laying and jointing glazed stoneware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete- 150 mm diametre.

18.00

metre

64

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design.- 150 mm diametre S.W. pipe.

18.00

metre

65

Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slab with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 mix (a cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement as per standard design inside size 90x80cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg. and weight of frame 15kg) with FPS bricks with class designation 75.

1.00

each

66

Providing and placing SFRC drain cover medium duty having holes 25 mm diametre of approved manufacturer all complete as per the direction of Engineer-in-charge.

7.00

each

67

Providing and fixing aluminium work (With minimum thickness 15 micron uniform coating) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary CP brass / stainless steel sunk screws, aluminium perimeter angles fixed to walls with rawl plugs @ 450 mm center to center and fixing the frame work to levels adjusting hangers (6 mm diameter MS rods) with necessary cadmium plated machine screws all complete as per approved architectural drawings and directions of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).

27.00

kilogram

68

Providing and fixing 4 mm thick coir veneer board, ISI marked IS:14842-2000 plain lining with necessary screws, priming coat on unexposed surface etc. complete.

29.00

Sqm

S.

No

Description of Item

Qty.

Unit

Rate

Amount

1.

Demolishing C. Concrete including disposal of material with in 50 m. lead 1:3:6 or richer mix.

28.00

Cum.

2.

Disposal of malba (building rubbish) by mechanical transport including loading and unloading with in a lead of 15 KM.

28.00

Cum.

3.

Providing and laying ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturer) of 1^st quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make in colours such as white ivory, grey , fume red brown, laid on 20m thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete.

691.00

Sqm.

4.

Providing and fixing 1^st quality ceramic glazed tiles conforming to IS: 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make in colours, shades, designs points except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3 kg. per sqm. including pointing in white cement mixed with pigment of matching shade complete.  

117.53

Sqm.